Menu Sidebar Widget Area

This is an example widget to show how the Menu Sidebar Widget Area looks by default. You can add custom widgets from the widgets in the admin.

If you own a backyard pool, you have probably heard a neighbour or friend rave about their salt water pool. The water feels softer, they say, their eyes do not sting after a swim, and they no longer haul jugs of chlorine home from the store every week. It is natural to wonder whether you could get the same experience without tearing out the pool you already have.

The good news is that in most cases, yes, you can convert a chlorine pool to salt water. The switch usually involves adding a piece of equipment to your existing plumbing and adding salt to your existing water. There are still a few things worth understanding before you commit, from how the system actually works to what it means for your equipment, your routine and your budget. This guide walks through all of it in plain language so you can decide whether the change makes sense for your household.

What a Salt Water Pool Really Is

The name causes a lot of confusion, so let’s clear it up first. A salt water pool is still a chlorine pool. The difference is where the chlorine comes from. Instead of you adding chlorine tablets, granules or liquid by hand, a device called a salt chlorine generator makes chlorine for you from salt dissolved in the water.

Here is the basic idea. Water flows from your pump through the filter and then through a cell fitted with metal plates. A small electrical charge passes through those plates, and as the salty water moves past them, the salt is converted into a form of chlorine that sanitizes the pool. Once that chlorine has done its job, it eventually reverts back into salt, and the cycle repeats. That is why you do not need to keep adding large amounts of salt: most of it stays in the water and gets reused.

The water is also far less salty than many people expect. Daigle Pool Servicing Co., a pool company in Londonderry, New Hampshire, explains on its salt water page that the ideal saline level for a salt pool is under 3,500 ppm, which it describes as roughly ten times less than ocean water. Most swimmers describe the water as soft and silky, with only a faint hint of salt.

Can Any Chlorine Pool Make the Switch?

Most residential pools can be converted. In-ground vinyl liner pools, concrete or gunite pools and fibreglass pools are all common candidates, and many above-ground pools can be set up for salt as well. Because the generator works with the circulation system you already have, the pool shell itself usually stays exactly as it is.

That said, “most” is the key word. A few details decide how smooth your conversion will be. The age and condition of your pump and filter matter, since the generator depends on steady circulation. The type of heater you have, the metals in your ladders, rails and light rings, and the materials around the deck all deserve a look. Natural stone coping, for example, can be more sensitive to salt than poured concrete or pavers. None of these automatically rules out a conversion, but they shape the plan.

If you are still choosing a pool rather than converting one, it helps to think about salt from the start. Browsing swimming pool options for New Hampshire backyards or similar guides in your own area can give you a feel for how pool type and sanitizing method fit together, which is much easier to plan before the first shovel hits the ground.

The Equipment That Gets Added

A typical conversion adds two main pieces of equipment. The first is the salt cell, a tube containing coated metal plates, which is plumbed into the return line after your filter (and after your heater, if you have one). The second is a control unit, usually mounted on a wall or post near your equipment pad, that powers the cell and lets you set how much chlorine it produces.

Many systems also include a flow switch, which shuts the cell off if water is not moving through it, and a sensor that reads the salt level and water temperature. Some newer setups connect to an app or an automation system so you can check readings from your phone. Depending on your current equipment, an installer may also suggest updating your pump or timer so the pool runs long enough each day to produce the chlorine it needs.

It is worth asking which brand your installer works with and who handles service on it. Some pool companies are authorized repair centres for specific manufacturers, which can make warranty work and replacement parts simpler down the road.

What Happens to the Water You Already Have

One of the most common questions is whether you need to drain the pool. In most cases, you do not. The existing water can usually stay in place, and the installer adds pool-grade salt directly to it, brushing it around until it dissolves fully. The system is then turned on once the salt has had time to mix through the water.

The bigger concern is what is already in that water. Over time, a chlorine pool can build up high levels of stabilizer (cyanuric acid), calcium or dissolved solids, especially if you have relied on stabilized chlorine tablets for years. If those levels are already high, a partial drain and refill may be recommended before adding salt so the system starts with balanced water. A good installer will test the water first and explain what, if anything, needs to change.

You will also want to stop adding stabilized chlorine products once the salt system is running. Continuing to drop tablets in the skimmer out of habit is one of the easiest ways to throw the water chemistry off balance.

Step by Step: How a Typical Conversion Unfolds

While every pool is different, most conversions follow a similar pattern. First comes a site visit and water test, so the installer can check your equipment, plumbing layout and water chemistry. This is where any compatibility questions get answered, such as whether your heater or deck materials need extra care.

Next is the installation itself. The cell is cut into the plumbing, the control unit is mounted and wired, and the system is connected to your pump so it only runs when water is flowing. After that, salt is added to reach the target level recommended by the manufacturer, and the water is circulated until it dissolves.

Finally, the system is switched on and the output is set. Over the following days, the chlorine level is tested and the output adjusted until it holds steady. Many installers will walk you through the controls and show you how to read the salt level, check the cell and spot the warning lights, which makes the first season far less mysterious.

What Changes in Your Weekly Routine

The biggest day-to-day change is that you stop measuring and adding chlorine by hand. The generator produces chlorine steadily whenever the pump runs, which tends to keep levels more consistent than the peaks and dips of manual dosing. For many owners, that consistency is the main reason they never look back.

Some tasks stay the same. You still need to test the water regularly, keep the pH in range, skim leaves, brush the walls and vacuum the floor. Salt pools often have a tendency for pH to drift upward, so checking pH and adding acid when needed becomes one of your more regular chores. You will also check the salt level from time to time and top it up after heavy rain, backwashing or splash-out, since those all remove some salty water.

There is one new job: caring for the cell. Minerals in the water can build up on the plates as scale, which reduces how well the cell works. Many cells have a self-cleaning feature, but it is still a good habit to inspect the cell during the season and clean it as the manufacturer recommends. Keeping the water balanced is the best way to slow that build-up in the first place.

How Salt Feels on Skin, Eyes and Swimsuits

This is where many households notice the biggest difference. Because a salt system can hold chlorine at a steady, lower level, swimmers often find the water gentler on skin and eyes. The strong “pool smell” people associate with chlorine usually comes from chloramines, compounds that form when chlorine reacts with sweat, sunscreen and other contaminants. Steady chlorine production can help keep those in check.

Daigle Pools notes on its site that people with a sensitivity to chlorine are often the ones who seek out salt systems, and that salt chlorination is known for soft water that is easier on skin, clothing and pool toys. Swimsuits and towels may fade more slowly, and kids who spend all afternoon in the water may come out with fewer complaints about itchy skin or red eyes.

It is worth keeping expectations realistic. A salt pool still contains chlorine, so anyone with a true chlorine allergy should talk to their doctor before assuming salt water will solve the problem. For most people who simply find traditional chlorine harsh, though, the difference is very noticeable.

Protecting Metal, Stone and Pool Equipment

Salt is corrosive over time, and this is the trade-off owners most often worry about. At the low concentrations used in pools, properly installed equipment generally holds up well, but some materials need more attention than others. Older metal ladders and rails, certain heater components and some natural stones are the usual suspects.

A few simple habits go a long way. Rinsing deck furniture and stone surfaces with fresh water now and then keeps salt from building up as water splashes out and evaporates. Keeping the pH and alkalinity in range protects metal parts. Some owners also install a sacrificial zinc anode, a small fitting that corrodes in place of more valuable metal components, which your installer can advise on.

If you are planning other upgrades, such as a new heater or new coping, it makes sense to choose salt-friendly materials at the same time. Doing that thinking up front saves you from replacing something sooner than you expected.

Where the Money Goes: Upfront and Ongoing Costs

The cost of a conversion depends on the size of your pool, the system you choose and whether any of your existing equipment needs updating. The main upfront expenses are the generator and control unit, the installation labour, and the initial load of salt. If a partial drain is needed or your pump needs replacing, those costs are added on top. The most reliable way to get a number for your pool is to ask local installers for written quotes.

On the ongoing side, you swap buying chlorine for buying occasional bags of salt, which most owners find far cheaper and easier to carry. You will still buy pH adjusters and other balancing chemicals. The larger long-term expense is replacing the salt cell when it wears out. Daigle Pools says on its page about salt water pool systems for NH homes that a cell should last about seven years when the water is balanced correctly, and that the company has seen owners save as much as $800 a year on traditional maintenance products after switching.

Your own numbers will depend on how much chlorine you use today, how long your swim season runs and how carefully you keep the water balanced. A useful exercise is to add up what you spent on chlorine and related products last season, then compare that against a quote for the conversion and a rough cell replacement down the road. That gives you a payback picture based on your own pool.

Running a Salt System Through Cold Winters

If you live somewhere with real winters, such as New England or most of Canada, the salt system needs a little seasonal care. Salt cells produce less chlorine in cold water, and many generators stop producing altogether once the water drops below a certain temperature. That is normal, and it is one reason spring and fall water testing matters so much in colder climates.

When you close the pool for winter, the cell and control unit are usually part of the closing routine. Many owners or service crews remove the cell, clean it and store it somewhere dry and protected from freezing, then reinstall it at opening. Draining the cell properly is important, since trapped water can freeze and crack the housing.

Opening season is also the time to check the salt level again. Winter rain and snowmelt, along with any water lowered or added during closing, can dilute the salt. A quick test before turning the system back on keeps the cell from struggling during its first weeks of the season.

Signs a Conversion Is a Good Fit for Your Household

A salt system tends to suit families who swim often and want steady, comfortable water with less hands-on dosing. If anyone in your home finds chlorine harsh on their skin or eyes, the softer feel alone can make the switch worthwhile. Owners who travel during the summer also appreciate that the generator keeps producing chlorine while they are away.

It also suits people who would rather spend a little more upfront to simplify their weekly routine. If you are tired of storing chlorine in the garage, lifting heavy containers or wondering how much to add after a pool party, a generator takes much of that guesswork off your plate.

Finally, conversions make a lot of sense when your equipment is already due for an update. If your pump, filter or heater is nearing the end of its life, combining those upgrades with a salt system can save on labour and give you a matched setup from the start.

Reasons You Might Hold Off

There are also good reasons to wait. If your pool has natural stone coping or a lot of older metal fixtures you love, you may want to plan for upgrades or extra maintenance before switching. If your budget is tight this season, a conversion is an easy project to postpone, since your current chlorine setup will keep working just fine in the meantime.

Some owners also simply enjoy hands-on water care and do not mind dosing chlorine themselves. If your pool is rarely used or you already keep the water comfortable with little effort, the benefits of a generator may feel smaller for you. There is no single right answer here; it comes down to how you use your pool and what you want from it.

Questions to Ask Before You Book the Work

When you start gathering quotes, a short list of questions helps you compare installers fairly. Ask which generator brand they recommend and why, whether they are authorized to service it, and who handles warranty claims if something goes wrong. Ask whether they will test your water first and whether they expect a partial drain to be needed.

It is also worth asking how the system will be sized for your pool, how long the cell typically lasts with their recommended care, and what is included in the installation. Find out whether they will show you how to read the controls, clean the cell and prepare it for winter. A clear walkthrough on day one makes owning a salt pool much more relaxed.

Last, ask about your specific materials: your heater, ladders, lights and deck. A thoughtful installer will mention these without being prompted, and their answers will tell you a lot about how carefully they plan the job.

The Short Answer, Revisited

So, can you convert a chlorine pool to salt water? For most pools, yes, and often without draining or replacing anything major. The change brings softer-feeling water, steadier chlorine levels and fewer trips to buy sanitizer, in exchange for an upfront investment, some attention to pH and the occasional cell replacement.

Whether it is worth it depends on how often your family swims, how much you spend on chlorine now and how your equipment and surfaces will handle salt. Take a look at your last season’s spending, get a water test and a couple of quotes, and you will have everything you need to make a confident decision for your backyard.

By Paul

HR Magz
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.